The USB Hi-Speed active booster extension
cable will allow existing USB cables
to be extended without losing signal
quality. These extensions can be
sequenced, allowing a total possible
distance of about 80 feet between
two USB devices. The typical distance
limitation of the USB signal (without
active boosters) is about 15 feet,
but this varies depending on equipment.
Thus, to achieve a long distance
between two USB devices, some expense
will be incurred. This is due to the
inherent limitations of the USB signal,
being a very high-speed signal and
therefore limited in terms of distance.
Please Note: Because the USB booster draws power from the bus of the host,
the UBX2-15 must be oriented properly. The male end of the cable must be in the direction
of the computer or powered hub, and the female (booster) end must be in the
direction of the device.
Device Features:
· Boost the USB signal strength (~15ft range beyond 1 booster).
· Maximum bandiwth over High-speed USB 2.0 and Full-Speed 1.1.
· Combinations allow the extension of a USB signal up to 80 feet.
· Buffers all upstream and downstream traffic for data control.
USB Features:
· Full Compliance with USB Revisions 2.0 and 1.1.
· Supports high speed transfer rates of up to 480 Mbps.
| 
