Login | Catalog | Contact | Support | Tech Info

DataPro International Inc.

Panel-Mount Ethernet RJ45 Cat5e Extension Cable

> Patch Cables, Panel Mount Ethernet Cables
Panel-Mount Ethernet RJ45 Cat5e Extension Cable
Offer network access anywhere with our panel-mount Category-5e rated Ethernet extension cables. Features a female RJ45 connector on the panel end, and a standard male RJ45 connector on the other.  

1770-01C   Cat-5e Panel-Mount Extension   1 ft $ 7.95   16630 in stock   Add to Cart
1770-02C   Cat-5e Panel-Mount Extension   2 ft $ 8.95   5867 in stock   Add to Cart
1770-03C   Cat-5e Panel-Mount Extension   3 ft $ 9.95   420 in stock   Add to Cart
1770-04C   Cat-5e Panel-Mount Extension   4 ft $ 10.95   55 in stock   Add to Cart
1770-06C   Cat-5e Panel-Mount Extension   6 ft $ 11.95   1647 in stock   Add to Cart
1770-10C   Cat-5e Panel-Mount Extension   10 ft $ 15.95   500 available Jul 2nd   Backorder
1770-15C   Cat-5e Panel-Mount Extension   15 ft $ 19.95   143 in stock   Add to Cart
1770-25C   Cat-5e Panel-Mount Extension   25 ft $ 24.95   104 in stock   Add to Cart
1770-00C   Cat-5e Panel-Mount Extension
Custom build at $20.00 + $0.50 per foot.
Some custom products may not be REACH compliant.
  Add to Cart

Technical Documents

Download Drawing

Download 3D Model

This 10/100/1000 panel-mount Ethernet cable is the perfect way to extend Cat5e to any plate, panel, or bulkhead. Requires no termination or punch-downs, and includes panel mounting hardware. Available in custom lengths.

Custom Lengths: Custom lengths up to 25ft (7.62m) will have the same appearance as pictured above, and are CL2-rated. Lengths over 25ft (7.62m) are unmolded (photo), and do not use CL2-rated wire by default. If you have special requirements for custom cables, just contact us!

RoHS Compliant
REACH Compliant
CL2 In-Wall Rated
IPC Compliant

Related Products:


  • Panel or bulkhead-mountable molded PVC hood
  • CL2 rated for in-wall use
  • Embedded 4-40 nuts with mounting screws included
  • Compatible with all DataPro Ethernet wall plates and panels


  • Allowable panel depth: 4.5mm (full mating)
  • Recommended screw installation: hand tighten, 2.0 in-lbs maximum torque
  • Category-5e rated Ethernet.
  • Compatible with 10-Base-T, 100-Base-T, and 1000-Base-T Gigabit.
  • Backwards-compatible with Cat-5

Recently Viewed: