|
Face Plates |
| DataPro Product Catalog > Face Plates |
|
|
Terminate your wire runs cleanly and easily with our complete line of
wall plate products. With our wide variety of configurations, these
easy-to-install plates give you access to your computers and devices
like never before.
From boardrooms to home theaters, industrial vehicles to boats large
and small, our faceplates provide sharp-looking data ports wherever
you need them. And in combination with our unbeatable range of
panel-mount cables, even the most difficult wiring scenarios can be
solved attractively and affordably.
All of our plates are built in our shop, precisely cut by computer-controlled
mills and hand-inspected by our machinists for cleanliness and detail.
Because we design and build them ourselves, we can offer these plates with
higher quality and lower cost. Need to place a large order? Our shop is
capable of producing hundreds of plates per day, so we'll still ship your order promptly.
For more information on our wall plate and panel-mount cable possibilities,
take a look at our Wall Plate Information
Guide.
|
| | |
| Face Plates |
> | USB & FireWire Wall Plates
Install ports for most every peripheral on the market with our
wide selection of USB and IEEE-1394 face plates.
|
| |
> | VGA Wall Plates
Remotely mounting video monitors and projectors is no longer a problem, thanks
to our full line of VGA face plates. They also work for 9-pin RS232 connectors in
serial applications.
|
| |
> | DVI & HDMI Wall Plates
Installing flat-panel displays has never been easier or more convenient! We
carry various combinations of DVI and HDMI bulkhead plates to match your
needs.
|
| |
> | RCA & Audio Wall Plates
Perfect for home theater and multimedia installations, our attractive RCA and
3.5mm plates offer instant high-quality media ports without on-site termination.
|
| |
> | PS2 & Parallel Wall Plates
Access to remote computers and KVM switches is easy to install when using any
of our numerous PS2 bulkhead mounting plates.
|
| |
> | Horizontal Wall Plates
For special applications, our horizontal plates offer a flexible solution for problems that cannot be solved with a standard form-factor plate.
|
|
|
|
|
|
 | 7000-1 |
Blank 1-Gang Wall Plate |
| The DataPro 7000-1 Blank Face Plate
holds any combination of connectors
in a simple, clean-looking faceplate
that mounts to any wall or standard
size, single-gang electrical box.
|
|
 | 7000-2 |
Blank 2-Gang Wall Plate |
| The DataPro 7000-2 Blank Face Plate
holds any combination of connectors
in a clean, proper wiring interface
that mounts to any wall or electrical
dual-gang box.
|
|
 | 7001 |
Wall Plate with Grommet Hole |
| The 7001 series of wall plates are simple wiring solutions for out-of-site installations.
They feature a circular cut hole in the middle and a protective rubber grommet.
This is an ideal solution for cleaning up wiring holes when panel-mounting
terminals is impracticle or impossible.
|
|
 | 7010 |
Keystone Plates (1-6 ports) |
| The DataPro 7010X Keystone Wall
Plate holds any combination of
connectors in a simple, stylish
interface that mounts to any wall.
|
|
 | 7910 |
Keystone Surface Box White |
| The DataPro 7910x Keystone Surface Mount
Box provides an external mounting for
any standard keystone-type jack. They are
a slim, no-mess solution to most any home,
office, or marine wiring problem.
|
|
 | CUSTOM_P |
Custom Wall Plates |
| Get the ports you want, where you want! Our precision-cut wall plates offer
flexibility and convenience that looks good, too. Choose from a variety of
sizes and materials, and let our experienced machinists cut the perfect plate
for your specific situation.
|
|
|
|
