Design your own custom plate now!|
Try our easy-to-use Custom Plate Designer utility.
These two-gang blank wall plates will hold double the number of connectors as our single-gang blank plates.
You can have them custom-cut to your
specifications, using any variety of connectors you choose. A great solution for home networks, or home theaters!
The 7000-2 face plates are made for fitting onto a double-wide low-voltage box,
similar to a double AC outlet or light switch. Their rugged design and professional
look make these plates an ideal solution for home internetworking and cable extension
management. Four flathead mounting screws are included with each plate, to fit any
standard double-gang surface mount box or 'in-the-wall'-type switch box.
Still not enough space!? Please see our triple gang and quadruple gang plates, part numbers 7000-3 & 7000-4 for additional mounting space.
The 7000-2 series blank wall plates are designed to mount to any standard US double gang electrical box with the provided screws. A standard-sized US double gang surface mount box has the following measurements: WxHxD - 4.53" x 4.53" x 1.77" (115mm x 115mm x 45mm)
If an electrical box is impractical for your application, you can always mount the plate directly to a surface with the proper screws (not included). Just be sure that you hand-tighten the screws with a screwdriver to avoid damaging your plates. We do not recommend the use of an electrical driver for final tightening.
For information about selecting, installing, and
using wall plates in your applications, see our
Guide to Face Plates.