For all its strengths, wireless data transfers can suffer immensely when an antenna
is in the wrong place or a base station is too far away. With DataPro's full
offering of wireless antenna cables, you can position your equipment wherever you need it,
and even combine mis-matched connector types!
Wire your satellite or cable receivers wherever you want
with DataPro's custom-built F-type coaxial cables. Built
to your specifications with same-day turnaround, these are
the perfect solution for your television setup.
This antenna extension cable will extend any wireless antenna or device that uses the
standard polarity TNC connector. The SP-TNC connector is similar to the common BNC
connector, except that it uses threading to lock instead of a twist-lock.
The 1832-series is a coaxial cable for wireless antenna connections,
featuring one TNC male connector and N-Type male. This assembly is perfect
for repositioning a wireless antenna or base station, particularly when
adding a new antenna that uses a different connector type than the base.
Improve wireless signal strength while optimizing your positioning with an RP-TNC extension cable!
A low-loss solution for better range and strength from 802.11 networks, this cable will
extend any reverse-polarity antenna up to 75 feet.
The 1842 series cable is a coaxial cable
for wireless antenna connection, using a
RP-TNC (reverse polarity TNC) connector
on one end and an N-Type connector on the
other end. Both connectors are male.
The 1850 series SMA cable is a coaxial antenna cable
for extending your existing wireless antenna cable,
with SMA male on one end and SMA female
on the other end.
The 1851 series cable is a coaxial cable
for wireless antenna connection, using an
RP-SMA (reverse polarity) male connector on
one end and an RP-SMA (reverse polarity)
female connector on the other end. This
cable is used as an extension for SMA
reverse polarity wireless antennas.
DataPro's SMA/BNC antenna cable is a low-loss
coaxial cable designed to relocate a wireless
antenna or base station that uses a different
connector than what it's connecting to.
The 1858 series cable is an RG58 coaxial
cable with a BNC male connector on each
end. It is one of the commonly used
type of cables for wireless antennas.
This is a coaxial cable for wireless antenna connections using an
RP-SMA (Reverse Polarity) male connector on one end and an N-Type connector on the
other end.
Route a TNC connection quickly and cleanly to a plate, panel, or bulkhead with this panel-mount TNC extension cable. It features a male TNC connector on one end, and a panel-mount female TNC connector on the other. Available in custom lengths.
