This rugged HDMI cable can maintain a fully waterproof connection when paired with our IP68 Waterproof HDMI Coupler. Supports HDMI High Speed w/Ethernet, 4K 60Hz.
Note: This cable is not compatible with standard HDMI jacks.
Network installation has never been easier! Our Cat-6 panel-mount coupler attaches to any of our stock or custom Ethernet wall plates and gives you tool-less networking anywhere you want.
The easiest way to build DisplayPort into your world is with this handy
female-to-female panel-mount passthrough coupler. The dual female ports will splice two
normal DisplayPort cables, and the panel-mounting shell will mount directly
to an enclosure or wall panel.
This panel-mount Dual-Link DVI-I passthrough coupler features female DVI ports on each side, and is built with high-grade components to ensure minimal noise loss.
This HDMI coupler provides full HD access through a bulkhead, chassis port, or any of our custom wall plates.
Using pre-existing cables? You can easily adapt them to be panel mounting with this passive, pass-through HDMI coupler while
converting them for use as panel-mounting jacks.
If you can't panel-mount a PS2 cable to access your keyboard and mouse (or if you've already got the cables in
the wall), try a panel-mount coupler instead. Designed to fit with any custom-cut face plate, these
low-profile and attractive couplers provide smart and effective connectivity
for any PS2 device.
DataPro's panel-mount binding posts are attractive, gold-plated terminal posts for
installing speakers in a home theater or commercial audio environment. They are
professional-grade connectors are available in black and red, and accept both bare-wire termination
(through their screw-down terminal) or banana plugs (inserted in the front).
Show off your RCA mounts with these durable RCA panel-mount connectors, available in so many colors!
Gold plated for durable contact and high-fidelity transfer, these passthrough
couplers can mounting to any of our plates or to your existing panels. An easy and attractive
solution to any RCA wiring situation!
Mount an SD card reader to a plate, panel, or bulkhead with this modular USB card reader. Featuring a full-size SD card slot on the front, and a Molex 5-pin connector on the back.
This no-nonsense panelmount passthrough coupler is a screw-locking splicer
with a female SMA connector on each end. It mounts in a round hole and provides a secure connection to
cables on both sides.
The DataPro TNC panel-mount passthrough couplers allow you to mount a TNC pass-through
to any custom-cut faceplate, providing a splice for two standard-polarity
TNC cables.
Put a DB37 port on your panel, wall plate, or bulkhead with this convenient passthrough connector. Similar to a gender changer, but with longer screws to accommodate mounting.
Enjoy maximum versatility and maximum speed with this unique panel-mount USB coupler. Featuring a USB 3.0 Type-A female connector on one end, and a USB 3.0 Type-B female connector on the other.
Add a C20 power inlet to a plate or panel with this durable solder-on connector that's compatible with standard C19 style power cables. Includes mounting screws.
