Products

Our new 1160-T series Panel-Mount HDMI cables fit the same cutout, and carry the same high quality signal as our 1160-Es, but with one important difference -- 30 AWG high-flex wire, allowing for runs through the tightest conduit and around corners, while still being fully HDMI 2.0 compliant. Check them out today!

We're expanding our lineup of IP-67-rated DisplayPort cables, with the addition of a Female-Female Coupler, Rugged Screw-On Port Cover, all compatible with each other, and forming an IP67-rated seal when mated.

We're adding a variety of new panel-mount cable options, designed to fit in an industry-standard Neutrik "D" cutout. Available in USB-C, USB 3.1 Type-A, DisplayPort, HDMI, and XT60.

We're happy to announce that we're now stocking IP67-rated panel-mount USB-C cables. This system consists of a Panel-Mount Cable that features a female USB-C port on the Panel end, which can be capped or mated with a Male-male USB-C Cable for a highly water resistant connection.

We're beefing up our built-in USB power offerings with six new models of Decora duplex outlet insert! These new Leviton modules include USB-A and USB-C ports providing up to 15W of power. Check them out!

Just slightly larger than the carry-on size 1535 Air and smaller than the 1615 Air, this new case is now available from DataPro pre-modded with panel mounting brackets. We also carry panels and sub-panels, configurable in our Online Plate Designer!

This new addition to our power offerings features a standard Decora style duplex outlet insert, with the addition of 2x USB-A, 2x USB-C, or 1x USB-A and 1x USB-C power outlets, supplying up to 30W of power. Also available in our Online Plate Designer!

Our rugged and IP67-rated DisplayPort cable is now available! Featuring a cap-free IP67 female panel-mount connector. Also available in our Online Plate Designer.

Pelican Case nameplates can now be customized via our Online Plate Designer. Customization includes both text labels and custom logo placement. Just click on the "Rugged cases" tab and select a nameplate to get started!

We've added two new waterproof USB cable options to our Online Plate Designer! The 1524 and 1624 feature dual USB-A jacks in either USB 2.0 or 3.1. Just search the cutout list for "dual USB"!

Our Panel-Mount Keyboard is now available as an option in our Online Plate Designer, just search for "keyboard" in the cutout list!

Our Pelican Case interior sub-panels are now available to configure via our online Plate Designer. We stock panels and sub-panels for nearly all models of Pelican, Storm, and Air cases.

Our new 1170W series DisplayPort extension cables feature an IP67-rated connector on the panel-mount end, and are DisplayPort 1.4 rated. Click here for more information.

Our panel-ready Pelican Vault cases are pre-modifed for drop-in mounting of case panels. More information here!

Right-angle or left-angle? USB-C's reversible connector works for both! We're now carrying left/right, up/down angled adapters, and even angle-with-a-twist. These adapters support Thunderbolt, USB4, 4K and 8K video, and up to 100W charging.

Need a specific TRRS configuration installed in a panel? Our 1227 series panel-mount 3.5mm cables are now available in CTIA or OMTP format, accommodating a wide range of audio devices. Click for more info!

Our newest panel-mount USB-C cables are built to accommodate nearly all USB-C formats, including USB4 and Thunderbolt at full speed, video, and MHL alt modes at speeds up to 40Gbps. Check out the 1648 series here!

Our popular aluminum toggle switch guards are now available in anodized red or blue. Also available in polished nickel, bare aluminum, black, and stainless steel.

PCI Expansion Slot Covers are now available for customization in our Online Plate Designer! These sturdy steel expansion slot covers can fit a variety of cutouts, and as always ship within 24-48 hours.

Escape from length limitations with a boosted panel-mount USB-C cable!

We're adding a new capability to our popular USB-C 3.1 Active Boosted Extension Cable - panel-mounting. Just add a YY-UBXC-PM to your boosted cable, and panel-mount it in any of our standard USB-A cutouts.

Our popular Pelican interior Sub-Panels are now available for Pelican Storm cases! These precision machined aluminum panels allow equipment and electronics to be securely mounted inside the case. We also carry sub-panels for Pelican Protector and Pelican Air cases.

Our popular 1" Toggle Switch Guards are now available in rugged 304 stainless steel! Great for protecting switches and components from impacts and accidental activation.

Short on space for your panel-mount cables? We've reduced the internal wiring gauge of our popular panel-mount HDMI cables to 30 AWG, giving them unprecedented flexibility! Check out our Thin Panel-Mount HDMI Extensions, available in lengths from 8 inches to 3 feet.

We're now stocking Pelican's latest line of cases - the Vault! Made with the same process as Pelican's legendary Protector and Storm cases, the Vault is crushproof, dustproof, and weather-resistant while remaining budget-friendly. Check them out here.

DataPro now offers installation of bezels used to mount a panel in a Pelican Storm case. This streamlined service makes installation of a panel as simple as possible, right out of the box!

Now you can add a case panel to any case that Pelican makes! We've expanded our line of panel-ready Pelican cases to include nearly every model of Pelican Protector and Pelican Air.

Skip the drilling and save time with our new panel frame installation and sub-panel installation services!

With recent wide-ranging surveillance camera hacks, it helps to have a heightened sense of awareness and take extra security precautions. This is exactly what we had in mind when we designed our PiCams to keep your data local. We've taken the time and care to build our DataPro Raspberry Pi Webcam with an emphasis on usability and security. Using open-source software and American made materials we proudly present our CAM-V1A.

Pelican's MOLLE case lid organizers are an easy and versatile way to add organization to the inside lid of your Pelican case. Check them out here!

SKB Case Panels are now available! We stock a supply of blanks, and can produce customized panels on demand. Custom panels can also be created with our online Custom Plate Creator.

DataPro is now offering interior panels for Pelican Cases. These panels are installed on the interior floor of the case and can be used to attach electronics and other components.

We offer a variety of services that can help make your unique project a success - check out our new selection of Value Added Services and Quality Assurance!

DataPro is now carrying Panel-Ready Pelican 1600, 1610, and 1620 cases! These genuine Pelican cases are professionally modified to accept one of our exclusive Pelican Case Panels.

DataPro is now stocking a range of fiberoptic HDMI cables in lengths from 15-250ft (4.5-76m). These fully HDMI 2.0-compliant cables can carry a 4K 60Hz signal up to 250ft (76m) without boosters or extra power...

We're adding a new type of custom panel to our lineup - aircraft-grade custom Dzus panels. Check out our Custom Dzus Panels page, and contact us with any questions!

DataPro is proud to offer a screwless solution for panel-mounting USB cables. Our new Snap-In Panel Mount USB 2.0 Extension Cable snaps cleanly into a plate or panel.

We now carry Pelican's popular 1510 case with pre-installed panel mounting brackets. This makes it super simple to install a panel -- just screw it in!

Our new USB-C power meter measures voltage, amperage, directionality, and total transfer. Perfect for troubleshooting and testing!

We're adding standard 19" rack mount cases to our Custom Plate Creator. Configure the front panel with any of our dozens of panel mount products!

Our new Rugged Aluminum Raspberry Pi Camera Case accommodates a Raspberry Pi and Camera Module, and includes a threaded tripod mounting hole on the bottom for easy installation.

We've got a fancy new YouTube video up, highlighting our 1598 Panel-Mount USB 2.0 Extension Cable. Check it out!

Need a custom enclosure for your SBC? DataPro has you covered!

Need to send a 4K signal a long distance? This handy extender will send it up to 200ft over a single Cat5 or Cat6 cable!

Upgrade your CATV equipment with DataPro's new F-Type connector. Our updated CCP-FTV supports transmission frequencies up to 3 GHz, in compliance with the most recent Data-Over-Cable Service Interface Specification (DOCSIS 3.1).

Our latest panel-mount offering is a balanced, locking 1/4" TRS jack. Locks with no special configuration of the plug! Check it out here.

We're expanding our line of Rugged Case Panels to include Seahorse cases as well. Put one together online using our Custom Plate Creator, or contact our sales team with your preexisting design or drawing! Click here for more information.

We're signing on for something new, and hanging out our shingle. Check out our illuminated aluminum and acrylic signs!

Our latest customizable product is a tabletop pop-up box whose panel can be customized directly through our Plate Creator. Add data, power, AV connectors, and more directly to a desk, conference table, or counter!

We're always expanding the offerings on our online Plate Creator! Our newest addition is Australian Clipsal style wall plates.

We're now your one stop shop for all things Pelican Case Panel related! Check out our new stock of Pelican Cases and Panel Frames to go along with our popular Pelican Case Panels!

We're always adding new capabilities and products to our line. Our latest is fully custom aluminum and steel enclosures, milled or laser-cut right here! Click through for more information.

We're now offering Spanner style tamper-resistant screws via our Wall Plate Creator. If your plate is compatible, they'll be offered at the last step for a small upgrade charge.

We've expanded the capabilities of our Custom Plate Creator to now include Custom Telecom Plates!

Check out our new lineup of custom panels, made to fit every common size of Pelican brand protective case, and available for customization online.

We're always making cool stuff over here - check out one of our latest customer projects, with an enclosure milled from solid aluminum!

Now it's easier than ever to add Laser marking to a Custom Wall Plate!

Need rugged USB ports to mount in a bulkhead or panel? We now carry IP67 rated panel-mount cables in both USB Type-A and Type-B, making them both waterproof and dust tight.

The USB 3.0 Promoter Group has announced a new orientation-free, low-profile USB 3.1 plug called USB Type-C - read on to find out how it stacks up against current formats.

Picking up a PlayStation 4? Extend the reach of your DualShock 4's charging cable with one of our USB Micro-B cables!

Did you know DataPro can customize enclosures? We offer a full range of milling, marking, and assembly options for enclosures of all shapes and sizes!

USB 3.0 Debugging cables are now back in stock in all lengths.

We are now able to meet the needs of Mac users world-wide with the immediate availability of our Mini-DisplayPort extension cables, our newest line of Mini-DisplayPort cables and adapters. The DataPro Mini-DisplayPort cables are shipping immediately in 6ft, 10ft, and 15ft lengths.

Mini-DisplayPort adapters for DVI, HDMI and VGA displays are now available! Connect new unibody Apple MacBooks, MacBook Pros, and Mac Pros to standard PC monitors and HDTVs with ease.

DataPro is proud to offer attractive, custom-cut faceplates up to 10.5 x 10.5 inch in aluminum and acrylic. These plates are perfect for high-end audio and television equipment racks and any application where a standard lightswitch-sized faceplate will not suffice. We also offer custom faceplates from 1U to 4U sizes for IT server racks.

As we continue to fill out our DisplayPort product line, expect Mini-DisplayPort adapters and cables for sale soon from DataPro!

DataPro is now offering a new CSV-955A that's even better than the Vdigi VD-Z3 we used to carry, which has been discontinued for several months.

Plate Designer can now be used to create EU and UK wall-plates. We also now offer square industrial plates.

DataPro's UDV-100 and UDV-101 offer DVI/VGA output to any USB-equipped Mac OS X or Windows XP/Vista laptop.

To better meet the demands of home theater enthusiasts, DataPro has developed the new HD Media Panel with everything you could ask for. This all-in-one wallplate allows you to easily connect an HDTV to all your high-definition sources.

You've asked for it, now here it is: media connectors side-by-side with power outlets in one compact solution. DataPro is proud to introduce another of our signature faceplates, the All-In-One Media Panel.

DataPro is proud to introduce another high-quality cable to our product line: premium HDMI cables. These new cables provide the ultimate performance for your high-end home theater system.

For improved durability and consistency, we are now manufacturing our various panel-mount stereo cables with strain-relief boots instead of shrink tubing.

DataPro is pleased to announce the arrival of the new panel-mount ethernet cable, now with a moulded female hood and rated for high-speed CAT6 data transfers.

You asked for it, and now you've got it-- USB cables with panel-mounting connectors at both ends!